How to make a car soundproof with your own hands

Extraneous noise in a car is an unpleasant phenomenon for any driver, especially when it comes to a private car. Typically, there are several major types of noise sources which you can eliminate. You can do this yourself using special materials. The specialists of the AvtoTachki company https://avtotachki.com/en/shumoizolyacziya-avtomobilya-svoimi-rukami/ will tell you the best way to install sound insulation and bring comfort to your vehicle.

Preparation for soundproofing and material selection

There are two main sources of noise: internal and external. With the external one, everything is simple: we are talking about wind, rain and other phenomenons that spread various sounds from outside the cabin. But internal noise is directly the sounds that can be heard inside the car. It can be squeaks, knocks, sounds inside the glove compartment, etc. It is easy to eliminate them, and only then you can start soundproofing. Before you start getting rid of the noise, you need to take care of the materials. To achieve the goal, you will need:

  • vibration isolation (or vibroplast).
  • weighted vinyl;
  • soft porous fabrics (“Splen”, “Accent” 10).

Each of them performs certain functions. The vibration damping material is made of special rubber. It is installed between panels to minimize vibrations and reduce noise “attack”. It is enough to cover 50% of the surface with this material and vibration will be reduced. The most popular options: vibroplast Silver, Gold. In the case of the barrier method the loaded vinyl is used against noise. It allows you to block out various sounds. It can be installed on 90-100% of the surface. Most often used “Noiseblock.” Soft porous fabrics serve to reduce echo and multiple reflection of sound. Jute, felt and polyurethane foam are ideal choices. You can also purchase a hybrid material that combines two or more types. All of them are designed to muffle and dissipate sound, therefore they are very effective.

What and where to use

In order to reduce noise in one or another part of the car, you need to understand how to use the material for sound insulation correctly. If you need to drown out noise in the hood, then vibroplast will be the ideal option. Company “AvtoTachki” suggests paying attention to Silver and “Accent” 10 mm. If you need to reduce the sound coming from the door, experts recommend using vibroplast Silver or Gold. You will also need “Splan”. Materials need to be laid in layers to achieve the desired effect. Working with the roof is also important, but you need to be careful here. It is enough to use the material “Splen” and “Bimast bombs” (vibration-absorbing material, made on a bitumen and mastic basis). If you need to soundproof the trunk, use the vibroplast Silver and Gold. Additionally, gravel protection will be required, especially for wheel arches, which need to be protected from corrosion.

4 comments

try here July 23, 2023 at 11:40 am

… [Trackback]

[…] Find More here on that Topic: thelibertarianrepublic.com/how-to-make-a-car-soundproof-with-your-own-hands/ […]

Tropicana cherry https://exotichousedispensary.com/product/tropicana-cherry/ August 8, 2023 at 12:07 pm

… [Trackback]

[…] Here you will find 20198 additional Info to that Topic: thelibertarianrepublic.com/how-to-make-a-car-soundproof-with-your-own-hands/ […]

health tests September 12, 2023 at 3:34 pm

… [Trackback]

[…] There you can find 3867 additional Information to that Topic: thelibertarianrepublic.com/how-to-make-a-car-soundproof-with-your-own-hands/ […]

zinc in mushrooms October 22, 2023 at 8:37 am

… [Trackback]

[…] There you can find 62505 more Information on that Topic: thelibertarianrepublic.com/how-to-make-a-car-soundproof-with-your-own-hands/ […]

Leave a Comment